createx

UVLS CLEAR 120 ml

Pris:
179 kr
Inkl. 25% Moms
Art.nr:
405104
Antal:
GLOSS- SATIN- MATTE
Ultimate color protection 120 ml

Waterbased
Acrylic Aliphatic polyurethane

4011 REDUCER CREATEX

Pris:
149 kr
Inkl. 25% Moms
Art.nr:
044011
Antal:
Finns i lager
WATERBASED 120 ML

CREATEX AIRBRUSH CLEANER 5618

Pris:
110 kr
Inkl. 25% Moms
Art.nr:
5618
Antal:
Finns i lager
120 ml

4030 BALANCING CLEAR 60 ml

Ord. pris:
149 kr
Pris:
149 kr
Inkl. 25% Moms
Art.nr:
4030
Du sparar:
0 kr (%)
Antal:
Finns i lager
60 ML 
Usage 1) Mix Additive Mix with any Createx paint to create an acrylic-urethane paint. Adding 4030 to Createx paints: - Improves adhesion and durability (mar resistance) - Improves leveling and edge retention - Decreases surface tension allowing for heavier coats without cratering and improves leveling - Reduces drying times 4030 is generally added 10% per volume to Createx paints
4030 is a resin and may be added in any ratio without affecting adhesion. Adding 4030 to paint increases transparency. Add 4030 to paint, then dilute with 4011 Reducer. After mixing, allow paint 10 minutes to acclimate to additives for optimum spray performance. 2) Inter-coat Clear 4030 may be used as a clear. While not intended as a top- coat clear for automotive refinishing, it works well as an inter-coat for taping & masking over for graphic applications. When fully cured, 4030 is a water-resistant clear that is suitable for prolonged exposure to exterior conditions.
Application When applied as a clear, 4030 is best thinned ~ 5% with 4011 Reducer and applied in medium coats. Apply 2 – 3 coats with a 50/50 overlapping pattern for pin-hole free coverage. - Airbrush – 0.5mm ~ 1.7 – 2.1 ba